PP+PET madia

Glassfiber HEPA filter material is made by fiberglass fiber extracted from sand. It is produced through a wet laid process which allows it to have high strength and flexibility. This material is made from glass microfibers. It has various characteristics such as high dust holding capacity, easy-pleating, and low air resistance.

Common Applications: Applied to large air flow ventilation system, filtration system of Pharmaceutical, food, hospitals, clean room etc. It can be used as terminal-filtration of medium and high efficiency filtration system or pre-filtration of super-efficient filtration system.

Micron ratings from 1 to 200 Temperature ratings up to 275° F Wide chemical compatibility range Depth loading material High dirt holding capacity Singed to reduce fiber migration

Technical Specification: Media:PE Thickness:1.7mm Unit Weight:500g/㎡ Operating temperature:130℃-150℃

Automobile filter production machine

Production: 500gsm antistatic  polyester needle punched felt Construction Needle Felt Fibre Composition Polyester+Conductive yam Scrim Composition Polyester Felt Area Weight 500g/m2 Thickness 1.7mm Mean Air Permeability 15(m3/m2/min@200pa) Breaking Strength-MD(warp) ≥1100 Breaking Strength-CMD(weft) ≥1500 Breaking Elongation(N/5cm)-MD (warp) ≤35 Breaking Elongation(N/5cm)-CMD (weft) ≤60 Dry shrinkage MD(130℃warp ) ≤1.5 Dry shrinkage CMD(130℃weft ) ≤1.0 Operating Temperatures ≤130 deg C Recommended Maximum Continuous 130 deg C Recommended Maximum Surge 150 deg C Finish Heat set/singed/calendered Bag style: round bag (steel belt style) flat bag, special-shaped bag, drawstring bag, Filter bag head with thick felt, bottom reinforcement, bag body with iron ring,etc. Scope of application: Cement plant, steel plant, waste power plant, asphalt mixing plant, thermal power plant, feed plant, Flour factory, rice factory, ceramics factory, bathroom factory, foundry,etc.

INTERNAL S TYPE(Mini Pleat) HEPA FILTER Ultrathin filter D.O.P Testing: 99.97%、99.99%at 0.3 μm

Technical Specification: Media:PE Thickness:1.7mm Unit Weight:500g/㎡ Operating temperature:130℃-150℃